Phone
800-444-1508
Fax
800-255-5314
Email
- US Sales
- International Sales
- Quotes
- Technical Support
- Human Resources
The sand cone density test is an accepted and inexpensive method of determining the in-place density of soils. It is effective in soils with particle sizes up to 1.5in (38mm), using test hole volumes of approximately 0.1ft³ (2.8L).
Sand Cone Density Apparatus (6.5in) consists of a metal cylindrical valve with 0.5in (12.7mm) dia. orifice and two cones. The top cone allows the 1gal (3.8L) plastic jar to be threaded onto the valve, and the bottom 60° sand cone is sufficiently rigid to prevent distortion or volume changes in the cone. The cylindrical valve includes stops to prevent rotation past completely open or closed positions.
The HM-104 Density Plate is a 12x12in (304.8x304.8mm) aluminum alloy with 0.5in (12.7mm) high edge walls to contain soil sample that is dug using the 6.5in (165.1mm) center hole of the plate as a guide. After the test hole is prepared, the flange of the cone fits the plate opening for filling the hole with special density sand.
HM-106 Density Sand is clean, dry, uniform, uncemented, durable, and free flowing. Few particles pass No.200 (75μm) or are retained on No.10 (2mm) sieves. Bulk density varies by less than 1%. The 50lb (22.7kg) density sand packing bag is heavy and reinforced. MA-26X Aqua-Check is good for moisture determinations, and the HMA-8 In-Place Density Accessory Kit is a recommended accessory.
Features
Included Items
Accessories
Related blogs
Upper Funnel (Smaller Funnel): 2.375 x 1.625in (60 x 41mm) Dia. x H
Bottom Funnel (Larger Funnel): 6.75 x 5.375in (171 x 136mm) Dia. x H
Plastic Sand Cone Jar: 6.5 x 11in (165 x 279mm) Dia. x H
Enter your name, email, and questions below and we will reply during business hours (8am - 5pm EST, Monday through Friday).